Xycom Automation industrial computers (IPCs) are designed to provide processing power and versatility. The 4117T IPC offers a powerful processor with a wide range of features and an expansion slot. The 4117T also meets the rigorous requirements of the plant floor with a high-resolution LCD flat panel display in a rugged housing ideal for today"s manufacturing environment.

High Performance, Lower Power

The 4117T utilizes an Intel mobile processor providing superior processing power while utilizing half the wattage of a comparable Pentium 4 processor. The Pentium M 1.4 GHz processor out performs the desktop Pentium 4 2.0 GHz used in the 4115T while utilizing less wattage. The increased processing power with less heat generation makes the 4117T ideal for most factory automation applications requiring a NEMA enclosure. Less wattage input into the system results in less temperature rise in the enclosure. With less temperature rise the maximum ambient operating temperature is more easily maintained, possibly without the need for expensive enclosure cooling devices.


Sharp, Easy-to-Read Displays

The 4117T incorporates a bright 17.0" LCD with SXGA (1280 x 1024) resolution and an analog resistive touchscreen into a thin light-duty industrial PC. The on-board 4X AGP graphics controller provides full color resolution when displaying a 1280 x 1024 application screen.

Full compliment of I/O Ports

The 4117T comes standard with an extensive array of I/O ports (see photo below), including three high speed RS-232 ports, one parallel port, 2 USB 2.0 compliant ports, PS/2 mouse & keyboard ports, one 10/100 & one 10/100/1000 Mbps Base-T Ethernet ports, one VGA port, and audio ports (in/out/mic). In addition a half-length PCI and Type I/II CompactFlash card can also be added to even further enhance your I/O needs. The VGA port can be utilized to connect a VGA monitor. The built-in display and an additional monitor can be utilized simultaneously (both showing the same image).


Cooling Enhancements

When installing your 4117T into an enclosure, extra care should be exercised to ensure that the ambient air around the unit (inside your enclosure, not outside the enclosure) does not exceed 50°C. Exceeding 50°C may cause premature degeneration of the unit. Even though the 4117T utilizes a lower wattage Pentium M processor than the Pentium 4 based 4115T care still needs to be exercised when installing the 4117T into an undersized enclosure. Consult your enclosure manufacturer for proper sizing and/or cooling options. The product specifications and ratings section of this datasheet contains the information your enclosure manufacturer will require.

Electrical:

200 Watt AC, 100-240 VAC, 1.0 Amp, 50-60 Hz, 95 Watts nominal power.*

* Nominal Power is measured for a standard minimum configuration only. Any additional expansion and/or devices will increase the input power required.

Front Panel: NEMA 4/4X/12

- CE (EN 55022, Class A
- EN 6100-6-2
- IEC 60950-1
- EN 61000-3-2, Class A
- EN 61000-3-3)

FCC (47 CFR, Part 15, Class A)


Safety Agency Approvals:

- UL (UL 508) Listed
- cUL (CSA-C22.2, #142) Listed

-RoHS Compliant

Height: 14.0" (355.6 mm)
Width: 17.8" (452.1 mm)
Depth: 5.32" (135.1 mm)
Mounting Depth: 4.93" (125.2 mm)
Weight: 29 lbs (13.15 kg)


Mounting Dimensions (cutout):

Height: 13.1" [332.74 mm]
Width: 16.75" [425.45mm]


Mounting Options:

The 4117T is designed to be mounted directly into an equipment panel without requiring special mounting plates or brackets.

It can also be mounted on a wall with the wall-mount adapter included in the mounting kit or it can be mounted on a standard 100 mm VESA swing or pendent arm. The 4117T is not NEMA rated if mounted outside of a panel.

The 4117T carries a one-year parts & labor warranty.

Base Order Number: 4117T-1400-512-CDW-XP

Description: 4117T Industrial PC with a Intel® Pentium® M, 1.4 GHz CPU, 2M cache, 400 MHz system bus, 512 MB DRAM, 80 GB hard drive, CD-R/W (w/ DVD Read Only capabilities), and Windows XP operating system.