Новинки
Компания Avago Technologies представила новые микросхемы ALM-80110 и ALM-80210
подробнее >>
Сверхминиатюрные термокомпенсированные кварцевые генераторы
подробнее >>
GaN несогласованный транзистор компании RF Micro Devices
подробнее >>
Силовой N-канальный МОП-транзистор NTMFS4927N компании ON Semiconductor
подробнее >>
Монолитные интегральные схемы СВЧ переключателей компании Hittite Microwave
подробнее >>
Все новинки
|
Stationary application
 | |
UNITRONIC® BUS L2/FIP |
Note:
The stated bit rates allow the following cable lengths (maximum) according to
specification of PROFIBUS User Organsisation of one bus segment (Type A cable):
PROFIBUS-DP
(SIMATIC NET)
9.6 kbit/s = max. 1200 m
19.2 kbit/s = max. 1200 m
93.75 kbit/s = max. 1200 m
187.5 kbit/s = max. 1,000 m
500 kbit/s = max. 400 m
1.5 Mbit/s = max. 200 m
12.0 Mbit/s = max. 100 m
FIP
1.0 Mbit/s = max. 200 m
2.5 Mbit/s = max. 200 m
These bus cables can be used for PROFIBUS-DP as well as for PROFIBUS-FMS and FIP.
In accordance with DIN 19245 and EN 50170, e.g. for SIEMENS SIMATIC NET, also
suitable for FIP (Factory Instrumentation Protocol)
Characteristic impedance 150 Ohm +/- 15
Technical Data: see overview "UNITRONIC® Bus Cables".
LAPP KABEL is a member of the PROFIBUS User Organisation (PNO). | | |
UNITRONIC® BUS L2/FIP 105 |
Application:
C able has been designed for use in factory halls where temperatures up to a max.
105°C may occur.
The standard PROFIBUS cable can only be used up to a max. 80°C. This enables an
extended area of application. | | |
UNITRONIC® BUS L2/FIP ROBUST |
Application:
Use for PROFIBUS-DP or FIP in harsh industrial environment. For fixed
installation.
Advantage:
Significantly extended use and application areas, water and chemical resistance
for use in industrial conditions. High resistance tensile, soaps, etc.. | | |
UNITRONIC® BUS HFFR L2/FIP FC UL/CSA |
Application:
Application where the combination of halogen free outer sheath with properties
similar to polyurethane and enhanced flame retardancy is requested. | | |
UNITRONIC® BUS L2/FIP EMC plus |
Note:
The stated bit rates allow the following cable lengths (maximum) according to
specification of PROFIBUS User Organsisation of one bus segment (Type A cable):
PROFIBUS-DP
(SIMATIC NET)
9.6 kbit/s = max. 1200 m
19.2 kbit/s = max. 1200 m
93.75 kbit/s = max. 1200 m
187.5 kbit/s = max. 1,000 m
500 kbit/s = max. 400 m
1.5 Mbit/s = max. 200 m
12.0 Mbit/s = max. 100 m
FIP
1.0 Mbit/s = max. 200 m
2.5 Mbit/s = max. 200 m
These bus cables can be used for PROFIBUS-DP as well as for PROFIBUS-FMS and FIP.
In accordance with DIN 19245 and EN 50170, e.g. for SIEMENS SIMATIC NET, also
suitable for FIP (Factory Instrumentation Protocol)
Characteristic impedance 150 Ohm +/- 15
LAPP KABEL is a member of the PROFIBUS User Organisation (PNO). | | |
| |
|
Новости
Компания Silicon Laboratories представила серию Si51x
в которую входят кварцевые генераторы и кварцевые генераторы
подробнее >>Компания KEMET представила керамические чип-конденсаторы
предназначенные для монтажа на единую монолитную структуру.
подробнее >> С праздником 23 февраля
подробнее >>Генераторы с низкой G-чувствительностью
для военных и промышленных приложений
подробнее >>Cнижение цен на модели
драйверов светодиодов AIMTEC
|
