Новинки
Компания Avago Technologies представила новые микросхемы ALM-80110 и ALM-80210
подробнее >>
Сверхминиатюрные термокомпенсированные кварцевые генераторы
подробнее >>
GaN несогласованный транзистор компании RF Micro Devices
подробнее >>
Силовой N-канальный МОП-транзистор NTMFS4927N компании ON Semiconductor
подробнее >>
Монолитные интегральные схемы СВЧ переключателей компании Hittite Microwave
подробнее >>
Все новинки
|
PVC-Standard control cables with approvals
 | |
ÖLFLEX® 140 |
Application: |
Control cables in accordance with HD 21.13 S1 (VDE 0281 Part 13)
Suitable for fixed installation under medium mechanical load conditions as
well as for flexing application at free, non-continuously recurring movement
without tensile load or compulsory guidance
Mainly in dry, damp and wet interiors (including water-oil mixtures), but not
for outdoor use
Area of use:
Plant engineering and construction
Machine tools
Conveyor and assembly lines
Production lines
| |
Advantage: |
Manufactured and tested according to international standards
The PVC outer sheath is regularly monitored for its resistance against
aggressive test oils by our laboratory (HD21.1.S3)
The shielded type ÖLFLEX® 140 CY enables transmission of signals with low
interference in EMC-critical environments
Also as CCC-certified versions in accordance to the chinese market demands
| | |
ÖLFLEX® 140 CY |
Application: |
Control cables in accordance with HD 21.13 S1 (VDE 0281 Part 13)
Suitable for fixed installation under medium mechanical load conditions as
well as for flexing application at free, non-continuously recurring movement
without tensile load or compulsory guidance
Mainly in dry, damp and wet interiors (including water-oil mixtures), but not
for outdoor use
Area of use:
Plant engineering and construction
Machine tools
Conveyor and assembly lines
Production lines
| |
Advantage: |
Manufactured and tested according to international standards
The PVC outer sheath is regularly monitored for its resistance against
aggressive test oils by our laboratory (HD21.1.S3)
The shielded type ÖLFLEX® 140 CY enables transmission of signals with low
interference in EMC-critical environments
Also as CCC-certified versions in accordance to the chinese market demands
| | |
ÖLFLEX® 150 QUATTRO |
Application: |
World-wide application range due to multiple international approvals (HAR,
UL AWM, CSA, CCC)
Suitable for fixed installation under medium mechanical load conditions as
well as for flexing application at free, non-continuously recurring movement
without tensile load or compulsory guidance
Mainly in dry, damp and wet interiors (including water-oil mixtures), but not
for outdoor use
Area of use:
Plant engineering and construction
Machine tools
Installations, equipment and devices
Conveying and transport systems
Amendment: Single conductor or multi-conductor Type AWM (Appliance Wiring
Material) shall be permitted for industrial machinery (US) when part of a listed
assembly suitable for the intended use only. NFPA 79 Edition 2007 §12.2.7.3 (Electrical
Standard for Industrial Machinery)
| |
Advantage: |
Applicable in areas with increased demands to chemical resistance and flame
retardance
The UL/CSA AWM approvals allows common installation with other cables, which
are also carrying an operating voltage up to 600 V
Facilitates economical stocking, process planning and engineering, thus speeds
up the export orders
| | |
ÖLFLEX® 150 CY QUATTRO |
Application: |
World-wide application range due to multiple international approvals (HAR,
UL AWM, CSA, CCC)
Suitable for fixed installation under medium mechanical load conditions as
well as for flexing application at free, non-continuously recurring movement
without tensile load or compulsory guidance
Mainly in dry, damp and wet interiors (including water-oil mixtures), but not
for outdoor use
Area of use:
Plant engineering and construction
Machine tools
Installations, equipment and devices
Conveying and transport systems
Amendment: Single conductor or multi-conductor Type AWM (Appliance Wiring
Material) shall be permitted for industrial machinery (US) when part of a listed
assembly suitable for the intended use only. NFPA 79 Edition 2007 §12.2.7.3 (Electrical
Standard for Industrial Machinery)
| |
Advantage: |
Applicable in areas with increased demands to chemical resistance and flame
retardance
The UL/CSA AWM approvals allows common installation with other cables, which
are also carrying an operating voltage up to 600 V
Facilitates economical stocking, process planning and engineering, thus speeds
up the export orders
| | |
ÖLFLEX® 191 / 191 CY |
Application: |
UL and CSA approved Control Cable especially for the European and American
market
Suitable for fixed installation under medium mechanical load conditions as
well as for flexing application at free, non-continuously recurring movement
without tensile load or compulsory guidance
Mainly in dry, damp and wet interiors (including water-oil mixtures), but not
for outdoor use
Especially in industrial and/or EMC-critical environments
Area of use:
Plant engineering and construction
Machine tools
Air conditioning installations
Installations, equipment and devices
Amendment: Single conductor or multi-conductor Type AWM (Appliance Wiring
Material) shall be permitted for industrial machinery (US) when part of a listed
assembly suitable for the intended use only. NFPA 79 Edition 2007 §12.2.7.3 (Electrical
Standard for Industrial Machinery)
| |
Advantage: |
The UL/CSA AWM approvals allows common installation with other cables, which
are also carrying an operating voltage up to 600 V
Economical one-way cable conduit system applicable
Metrical and AWG specification of conductor cross section (fulfils both
standards)
| | |
ÖLFLEX® 191 CY |
Application: |
UL and CSA approved Control Cable especially for the European and American
market
Suitable for fixed installation under medium mechanical load conditions as
well as for flexing application at free, non-continuously recurring movement
without tensile load or compulsory guidance
Mainly in dry, damp and wet interiors (including water-oil mixtures), but not
for outdoor use
Especially in industrial and/or EMC-critical environments
Area of use:
Plant engineering and construction
Machine tools
Air conditioning installations
Installations, equipment and devices
Amendment: Single conductor or multi-conductor Type AWM (Appliance Wiring
Material) shall be permitted for industrial machinery (US) when part of a listed
assembly suitable for the intended use only. NFPA 79 Edition 2007 §12.2.7.3 (Electrical
Standard for Industrial Machinery)
| |
Advantage: |
The UL/CSA AWM approvals allows common installation with other cables, which
are also carrying an operating voltage up to 600 V
Economical one-way cable conduit system applicable
Metrical and AWG specification of conductor cross section (fulfils both
standards)
| | |
ÖLFLEX® CONTROL TM |
Application: |
USA NFPA 79 Edition 2007 conform MTW listed Machine Cable for North America.
TC (Tray Cable) Listing for fixed installation also allows wiring in between
machines on cable trays in accordance to NEC
TC-ER (Exposed Run) approval for open / exposed run between cable tray and
utilization equipment or devices on and in machines in industrial establishments
in acc. to NEC 336.10(7)
Oil and wet rating allows an usage on / in metal processing machine tools
AWG conductors adapted to metric sizes allows an CE- conform usage in Europe
c(UL) CIC and TC listing & CSA AWM I/II A/B approvals allows nearly similar
fields of applications in USA and Canada
Class 1, Div. 2 per NEC Art. 336, 392, 501
Area of use:
Plant engineering and construction
Machine tools
Automotive industry
UL/CSA recognized:AWM1000V, 105°C,
Industrial plants
NOM listed (Normas Oficiales Mexicanas)
"Exposed Run"-approved, thus suitable for open wiring
| |
Advantage: |
According to the Exposed Run approval, unprotected installation with no
restrictions on distance between cable tray and electrical equipment is allowed
Makes installations much easier, quicker in compliance to your industrial
requirements
As a result of the short lay length stranding, the precisely extruded outer
sheath and the world-wide approvals, ÖLFLEX® CONTROL TM is a superior
alternative to stationary TC cables
Its flexible design allows a quick and easy installation, small bending radii
and protecs against conductor -breakdowns may occurred by mechanical shocks /
vibrations
| | |
ÖLFLEX® Tray II |
Application: |
Oil-resistant, flexible Control Cable with multiple approvals, particularly
suitable for applications in America, Canada and Mexico
"Exposed Run"-approved, thus suitable for open wiring
Designed for use in all electrical equipment in dry, damp and wet conditions
UV-resistant and weatherproofed
For outdoor use considering the temperature range
Suitable for direct burial
Class 1, Div. 2 per NEC Art. 336, 392, 501
Area of use:
Plant engineering and construction
Machine engineering
| |
Advantage: |
According to the Exposed Run approval, unprotected installation with no
restrictions on distance between cable tray and electrical equipment is allowed
Makes installations much easier, quicker in compliance to your industrial
requirements
As a result of the short lay length stranding, the precisely extruded outer
sheath and the world-wide approvals, ÖLFLEX® Tray II is a superior alternative
to stationary TC cables
| | |
| |
|
Новости
Компания Silicon Laboratories представила серию Si51x
в которую входят кварцевые генераторы и кварцевые генераторы
подробнее >>Компания KEMET представила керамические чип-конденсаторы
предназначенные для монтажа на единую монолитную структуру.
подробнее >> С праздником 23 февраля
подробнее >>Генераторы с низкой G-чувствительностью
для военных и промышленных приложений
подробнее >>Cнижение цен на модели
драйверов светодиодов AIMTEC
|
