Новинки
Компания Avago Technologies представила новые микросхемы ALM-80110 и ALM-80210
подробнее >>
Сверхминиатюрные термокомпенсированные кварцевые генераторы
подробнее >>
GaN несогласованный транзистор компании RF Micro Devices
подробнее >>
Силовой N-канальный МОП-транзистор NTMFS4927N компании ON Semiconductor
подробнее >>
Монолитные интегральные схемы СВЧ переключателей компании Hittite Microwave
подробнее >>
Все новинки
|
PVC sheathed cables with coloured cores
| |
ÖLFLEX® CLASSIC 100 |
Application: |
Connecting and control cable, particularly suitable for use in industrial
environments
Mainly in dry, damp or wet interiors under medium mechanical load conditions
Outdoor use with UV-protection only, considering the temperature range
For free, non-continuously recurring movement application without tensile load
or compulsory guidance as well as for fixed installation
Area of use:
Plant engineering and construction
Machine engineering
Air conditioning installations
Power station
ÖLFLEX® CLASSIC 100 Design
Mainly where works standard, safety, colour or colour design are required.
ÖLFLEX® CLASSIC 100 Print
Printing service in all colours made by ink-jet or using embossing tool (either
embossed or embedded) |
Advantage: |
Reduced space requirements due to small outer diameters
The 4 kV Test Voltage ensures high insulation performance
Highly resistant against acids, lyes and certain oils at room temperature
High flexibility achieved by use of finely stranded, short-twisted copper wire
conductors
Improved sliding effect and safe separation of the cores by using talcum
powder
Up to 5 cores and max. 4 mm², ÖLFLEX® CLASSIC 100 complies with the
harmonisation conditions for H 05 VV-F | | ÖLFLEX® CLASSIC 100 Yellow |
Application: |
Connection Cable with yellow outer sheath in particular as warning indication
Circuits which remain live after the main switch is off must be marked in a
special way
According to VDE 0113 Part 1 or EN 60 204 Part 1, we recommend ÖLFLEX®
CLASSIC 100 Yellow in the well- proven ÖLFLEX® quality |
Advantage: |
As a result of the special LAPP PVC Compound P 8/1 and the 4 kV Test Voltage,
sizes starting at conductor cross section 1.5 mm² are suitable for Rated Voltage
up to 450/750 V. Within fixed and protected installations, up to 600/1000 V | | ÖLFLEX® CLASSIC 100 CY |
Application: |
Mainly where electrical interference fields caused e.g. by electrical motor
driven by frequency converters, can disturb signal transmissions
Further applications similar to ÖLFLEX® CLASSIC 100
Area of use:
Plant engineering and construction
Conveying and transport systems
Air conditioning installations
Office machines and systems for data processing |
Advantage: |
High shielding coverage and low transfer impedance (max. 250 ohm/km at 30 MHz)
The transparent outer sheath protect the tinned copper braiding against
soiling and mechanical damage
The 4 kV Test Voltage ensures high insulation performance
Largely resistant to oil and chemicals | | ÖLFLEX® CLASSIC 100 SY |
Application: |
Mainly in dry, damp or wet interiors where increased mechanical protection is
required
Outdoor use with UV-protection only, considering the temperature range
For free, non-continuously recurring movement application without tensile load
or compulsory guidance as well as for fixed installation
Further applications similar to ÖLFLEX® CLASSIC 100
Area of use:
Plant engineering and construction
Conveying and transport systems
Machine engineering
Air conditioning installations |
Advantage: |
The galvanized steel wire braiding with high degree of coverage offers
simultaneous mechanical protection and partial electromagnetic shielding effect
The transparent outer sheath protect the steel wire braiding against soiling
and mechanical damage
As a result of the special LAPP PVC compound P 8/1 and the 4 kV Test Voltage,
sizes starting from 1.5 mm² conductor cross section are suitable for a Rated
Voltage up to 450/750 V | | ÖLFLEX® CLASSIC 100 BK Power |
Application: |
Weatherproof, cold-flexible Power Cable, especially for use in industrial
environments
Mainly in dry, damp or wet interiors under medium mechanical load conditions
Outdoor use suitable considering the temperature range
For free, non-continuously recurring movement application without tensile load
or compulsory guidance as well as for fixed installation
Area of use:
Plant engineering and construction
Stage technology
Air conditioning installations
Power station |
Advantage: |
Cold flexible to -30 °C
UV-resistant and weatherproofed
The 4 kV Test Voltage ensures high insulation performance
High flexibility achieved by use of finely stranded, short-twisted copper wire
conductors
Improved sliding effect and safe separation of the cores by using talcum
powder | |
| |
|
Новости
Компания Silicon Laboratories представила серию Si51x
в которую входят кварцевые генераторы и кварцевые генераторы
подробнее >>Компания KEMET представила керамические чип-конденсаторы
предназначенные для монтажа на единую монолитную структуру.
подробнее >> С праздником 23 февраля
подробнее >>Генераторы с низкой G-чувствительностью
для военных и промышленных приложений
подробнее >>Cнижение цен на модели
драйверов светодиодов AIMTEC
подробнее >>
Все новости
|